gsr40tsi - reed/headkit/porting etc, not running
4 posters
Page 1 of 1
gsr40tsi - reed/headkit/porting etc, not running
Hey everyone, I want to sell my gsr40. It is not running at the moment and i can no longer be bothered to invest my time in it, as far as gopeds go i just want to keep my pro60 and get shot of everything else. here is the basic list of what you get.
engine
ts headkit
proline reed
pacsales pipe
engine is fully ported by gprm, it then seized and was later completely fixed by allen g
fancover mod by alleng and using a different coil (i believe and lh one) so there is no longer a rev limiter on the engine
roller
race pole
billet rims
steel ftg
lizard skin grips
no chain tensioner (i don't like chain tensioners on gsr40's, i prefer to manually adjust it by changing the chain length and then using different amounts of washers under the engine, it is annoying to do but worth it in my opinion)
theres probably other stuff on there i am not remembering
loads of spare stuff - chain breaker, various sprockets, half a g43l engine, basically everything for a gsr40 i have i will throw in
It is not running at the moment, it was working around 6 months ago but was not responding well to carb changes near top speed (was gearing it high and trying to see how fast it would go - would go about 45mph but i felt it had more in it if the carb would let me work with it a bit). figured it must have been the carb so i changed it, then left it for 6 months over winter, got it out of the garage the other day and now it wont run with either of the carbs i try on it. no idea what is going on. get this running and it is fast as hell, i just really can't be bothered for it any more. basically i'm just seeing if someone can give me an offer good enough to get rid of it and save me fixing it up and selling it as a runner. i don't have a mob phone at the moment but if you want to talk then leave message me your number and an appropriate time to ring and i will try my best to do so. thanks. tom.
engine
ts headkit
proline reed
pacsales pipe
engine is fully ported by gprm, it then seized and was later completely fixed by allen g
fancover mod by alleng and using a different coil (i believe and lh one) so there is no longer a rev limiter on the engine
roller
race pole
billet rims
steel ftg
lizard skin grips
no chain tensioner (i don't like chain tensioners on gsr40's, i prefer to manually adjust it by changing the chain length and then using different amounts of washers under the engine, it is annoying to do but worth it in my opinion)
theres probably other stuff on there i am not remembering
loads of spare stuff - chain breaker, various sprockets, half a g43l engine, basically everything for a gsr40 i have i will throw in
It is not running at the moment, it was working around 6 months ago but was not responding well to carb changes near top speed (was gearing it high and trying to see how fast it would go - would go about 45mph but i felt it had more in it if the carb would let me work with it a bit). figured it must have been the carb so i changed it, then left it for 6 months over winter, got it out of the garage the other day and now it wont run with either of the carbs i try on it. no idea what is going on. get this running and it is fast as hell, i just really can't be bothered for it any more. basically i'm just seeing if someone can give me an offer good enough to get rid of it and save me fixing it up and selling it as a runner. i don't have a mob phone at the moment but if you want to talk then leave message me your number and an appropriate time to ring and i will try my best to do so. thanks. tom.
piedog- Posts : 23
Join date : 2010-10-29
nizz- Posts : 409
Join date : 2011-12-23
Age : 56
Location : Scunthorpe
Re: gsr40tsi - reed/headkit/porting etc, not running
i'll do £500 posted for everything
piedog- Posts : 23
Join date : 2010-10-29
Re: gsr40tsi - reed/headkit/porting etc, not running
or just make me an offer, maybe i will just accept the best offer if its reasonable
piedog- Posts : 23
Join date : 2010-10-29
piedog- Posts : 23
Join date : 2010-10-29
Re: gsr40tsi - reed/headkit/porting etc, not running
Any chance you can stick some better pics up? Close ups of the engine, race pole .
nizz- Posts : 409
Join date : 2011-12-23
Age : 56
Location : Scunthorpe
Re: gsr40tsi - reed/headkit/porting etc, not running
on the weekend i'll get good pictures of everything and get them up on here
piedog- Posts : 23
Join date : 2010-10-29
Re: gsr40tsi - reed/headkit/porting etc, not running
ok look forward to seeing the pics.
nizz- Posts : 409
Join date : 2011-12-23
Age : 56
Location : Scunthorpe
Re: gsr40tsi - reed/headkit/porting etc, not running
Get some pictures up of your 60 to, would be nice to see it.
nizz- Posts : 409
Join date : 2011-12-23
Age : 56
Location : Scunthorpe
Re: gsr40tsi - reed/headkit/porting etc, not running
Very nice, I don't blame you neither would I sell her.
nizz- Posts : 409
Join date : 2011-12-23
Age : 56
Location : Scunthorpe
Re: gsr40tsi - reed/headkit/porting etc, not running
piedog wrote:on the weekend i'll get good pictures of everything and get them up on here
Any updates on this?
nizz- Posts : 409
Join date : 2011-12-23
Age : 56
Location : Scunthorpe
Re: gsr40tsi - reed/headkit/porting etc, not running
took pictures, posted a thread then took it down cause i decided i would rather put it all under the bed than sell it for £400. lol. maybe some time in the future i will feel like getting it out again
piedog- Posts : 23
Join date : 2010-10-29
danzTSI- Posts : 5
Join date : 2013-10-30
Location : South Wales
Re: gsr40tsi - reed/headkit/porting etc, not running
Dont think he will sell that
gopedguy- Posts : 5
Join date : 2012-09-20
Re: gsr40tsi - reed/headkit/porting etc, not running
He told me that it wasn't for sale.
nizz- Posts : 409
Join date : 2011-12-23
Age : 56
Location : Scunthorpe
Re: gsr40tsi - reed/headkit/porting etc, not running
I asked him is it for sale and he just wrote in bold. Writing. I WILL NEVER SELL ITnizz wrote:He told me that it wasn't for sale.
I'd like to get a pro 60 I quite like the look of the frame and the fact it's basically a tuned up superbigfoot
danzTSI- Posts : 5
Join date : 2013-10-30
Location : South Wales
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|